Welcome to download the newest Pass4itsure hp0-m52 Exam VCE dumps: http://www.pass4itsure.com/hp0-m52.html
Flydumps is one of the leading exam preparation material providers.We have a complete range of exams offered by the top vendors of their respective industries.You can download free CheckPoint 156-210 demos in PDF files that are the latest.
QUESTION 106
In the Client Authentication Action Properties window (below), for the required Sign On Method section, Manual is selected.
This means:
A. If a connection matches the Rule Base the service is an authenticated service, the client is signed on after a successful authentication.
B. The user must initiate the Client Authentication Session to the gateway.
C. If a connection using any service matches Rule Base, the client is authenticated.
D. If authentication is successful, access is granted from the network that initiated the connection.
E. The user must TELNET to the target server on port 259.
Correct Answer: B
QUESTION 107
Changes made to the Security Policy do not take effect on the Enforcement Module until the administrator performs which of the following actions?
A. Saves the policy.
B. Verifies the policy.
C. Install the policy.
D. Stops firewall services on the Enforcement Module.
E. Stops firewall services on the Management module.
Correct Answer: C
QUESTION 108
Consider the following network: The public servers are a web form. Since the web servers accepts and initiate connections Dynamic translation is required.
A. True
B. False
Correct Answer: B QUESTION 109
The fw fetch command perform the following function:
A. Attempts to fetch the policy from the Management Server.
B. Fetches users from the Management server.
C. Produces an output screen of the Rule Base.
D. Fetches the logs.
E. Fetches the systems status.
Correct Answer: A QUESTION 110
Inclement weather and a UPS-failure cause a firewall to reboot. Earlier that day a tornado destroyed the
building where the firewall’s Management Module was located. The Management Module was not
recovered and has not been replaced.
Bases on the scenario, which of the following statements is FALSE?
A. The firewall will continue to enforce the last rule base installed.
B. The firewall will log locally.
C. The firewall will fetch the last installed policy form local host and install it.
D. Communication between the firewall and the replacement Management Module must be established before the replacement Management Module can install a policy on the firewall.
E. Because the firewall cannot contact the Management Module, no policy will be installed.
Correct Answer: E QUESTION 111
When configuring Anti-Spoofing for VPN-1/FireWall-1 NG on the firewall interfaces, all of the following are valid address choices except:
A. Network defined by Interface IP and Net Mask.
B. Not Defined.
C. Security Policy Installed.
D. Specific
E. None of the above.
Correct Answer: C
QUESTION 112
The security administrator for the following configuration only allows members of the localnet managers group access files in BigBen (the FTP Server)
Select below the rule that allows local managers to access the FTP server from any location. No SOURCE DESTINATION SERVICE ACTION 1 nyBigBen ftp User Auth LocalManagers@A 2 et_LondonBigBen ftp Client Auth LocalManagers@N 3 nyBigBen ftp Session Auth LocalManagers@A 4 et_TokyoBigBen ftp User Auth LocalManagers@N
A. Rule 1.
B. Rule 2.
C. Rule 3.
D. Rule 4.
E. None of these rules allow access.
Correct Answer: A QUESTION 113
Assume that you are working on a Windows NT operating system. What is the default expiration for a Dynamic NAT connection NOT showing any UDP activity?
A. 30 Seconds.
B. 60 Seconds.
C. 40 Seconds.
D. 600 Seconds.
E. 3000 Seconds.
Correct Answer: C QUESTION 114
Assume there has been no change made to default policy properties. To allow a telnet connection into
your network, you must create two rules.
One to allow the initial Telnet connection in.
One to allow the destination machine to send information back to the client.
A. True
B. False
Correct Answer: B QUESTION 115
In Windows NT to force log entries other than the default directory.
A. You must use the cpconfig command.
B. Change the fwlog environment variable.
C. Modify the registry.
D. Change the directory in log viewer.
E. Use the fw log switch command.
Correct Answer: C QUESTION 116
For most installations, the Clean-Up rule should be the last rule in Rule Base.
A. True
B. False
Correct Answer: A QUESTION 117
What complements are necessary for VPN-1/FireWall-1 NG to scan e-mail, passing through the firewall, for macro viruses?
A. UFP and OPSEC-certified scanning product.
B. CVP and OPSEC-certified virus scanning product.
C. UFP and CVP.
D. UFP, CVP and OPSEC-certified content filter.
E. None of the above, VPN-1/FireWall-1 NG scans for macro viruses by default.
Correct Answer: B QUESTION 118
Why would you want to verify a Security Policy before installation?
A. To install Security Policy cleanly.
B. To check up the enforcement-point firewall for errors.
C. To identify conflicting rules in your Security Policy.
D. To compress the Rule Base for faster installation
E. There us no benefit verifying a Security Policy before installing it.
Correct Answer: C
QUESTION 119
To completely setup Static NAT, you ONLY have to select Add Automatic Address Translation rules on the NAT tab, and specify a public NAT IP address.
A. True
B. False
Correct Answer: B
QUESTION 120
If you configure the Minutes interval for a firewall in the User Authentication session timeout box, as shown below on the Authentication Tab of the Workstations properties window, users of one time password must re-authenticate for each request during this time period.
A. True
B. False
Correct Answer: B
QUESTION 121
What does a status of Untrusted tell you?
A. A VPN-1/Firewall-1 NG firewall module has been compromised.
B. A gateway cannot be reached.
C. A module is installed and responding to status checks, but the status is problematic.
D. A gateway is connected, but the management module is not the master of the module installed on the gateway.
E. None of the above.
Correct Answer: D
QUESTION 122
Omanan Enterprises has the premier reclamation system for scrap aluminum in the western hemisphere. Then phenomenal growth over the last 10 years has led to the decision to establish a presence in the Internet in order to their customers. To that end, Omanan Enterprise network administrator, Jason has acquired a Web Server, and email server and 14 IP addresses from their ISP. Jason also purchased a Checkpoint VPN-1/FireWall-1 stand alone gateway module, with these interfaces, to protect Omanan enterprises’ corporate data their ISP will be providing DNS services. The Web Server and email server must have Static routable IP addresses. The eight member executive counsel of Omanan Enterprises would to have routable IP addresses also, so that they can video-conference with the company’s suppliers. Omanan Enterprises’ remaining 200 employees would like to have access to Internet, and the executive counsel believe that granting them access might improve company morale. Jason installs and configured Checkpoint VPN-1/FireWall1 stand alone Gateway module at the perimeter of Omanan Enterprises corporate LAN. He uses the 3rd NIC in the stand alone firewall gateway module to create DMZ. Jason installs the Web server and the email server on the DMZ. He creates tools and objects on the checkpoint VPN-1/FireWall-1 stand alone gateway module to allow HTTP, POP3 and SMTP from the Internet to the DMZ. He Creates objects to represent the web and email server and configures them for Static NAT. Jason reconfigures his DHCP server so that each of the members of the executive counsel has reserved IP address. He then sues those reservations co create Statically NAT-ed objects on the Checkpoint VPN/ Firewall-1 Standalone Gateway module. Jason creates another object represents the internal network he configures this object for Dynamic NAT. He adds a rule allowing HTTP traffic from the internal network to any destination. Jason created an additional rule to allow POP3 and SMTP traffic between the internal networks and DMZ. Choose the one phrase below that best describes Jason’s proposal.
A. The proposed solution meets the required objectives and none of the desired objectives.
B. The proposed solution meets the required objectives and only one of the desired objectives.
C. The proposed solution meets the required objectives and all desired objectives.
D. The proposed solution does not meet the required objective.
Correct Answer: C
QUESTION 123
Anna is a security administrator setting up User Authentication for the first time. She has correctly configured her Authentication rule, but authentication still does not work. What is the Check Point recommended way to troubleshoot this issue?
A. Verify the properties of the user attempting authentication and the authentication method selected in the Authentication Properties of your firewall object.
B. Verify the firewall settings of your firewall object, and the properties for the user attempting encryption and authentication.
C. Verify the properties for the user attempting authentication and make sure that the file Stealth Authentication method is selected in the Authentication properties of both the peer gateway object and your firewall object.
D. Verify both Client and User Authentication, and the authentication method selected in the Authentication properties of your Firewall object.
E. Re-import Schema from the VPN-1/FireWall-1 NG installation CD.
Correct Answer: A
Flydumps CheckPoint 156-210 Exam Materials including the real questions and the answers, is complete by our senior IT lecturers and the Certified Specialist product experts. CheckPoint 156-210 dumps is unparalleled in quality and is 100% guaranteed to make you pass your CheckPoint 156-210 exam. Whether you decide to use our CheckPoint 156-210 dumps you can rest assured that you will pass the exam and get the certification that you want.
Welcome to download the newest Pass4itsure hp0-m52 Exam VCE dumps: http://www.pass4itsure.com/hp0-m52.html
CheckPoint 156-210 Dumps, Best CheckPoint 156-210 Certification With Low Price