Do not worry about your Cisco 350-029 exam,Flydumps now has published the new veriosn Cisco 350-029 exam dumps with more new added questions and answers,also you can free download Cisco 350-029 exam vce test software and pdf dumps on https://www.pass4itsure.com/350-029.html.
QUESTION 136
Which of the following events can NOT be tuned via router configuration to provide for faster convergence following a link failure?
A. Failure detection
B. Failure reporting
C. IGP LSP/LSA origination
D. Per-hop flooding time of new link state
E. Number of hops that need to be notified of new link state
Correct Answer: E
QUESTION 137
What best explains the BGP route-reflector function?
A. BGP route-reflector should be in forwarding path of data coming from its clients.
B. BGP route-reflector does not have to be in the forwarding path of data coming from its clients.
C. BGP route-reflector will stop reflecting the routes if they’re not directly-connected clients.
D. None of the above.
Correct Answer: B
QUESTION 138
In Any Transport over MPLS (AtoM) Control word is an optional 4-byte field used in the pseudowire packet. The control word carries generic and Layer 2 payload-specific information to emulate L2 packets correctly. In pseudowire packet, where is this Control Word inserted ?
“First Test, First Pass” – www.lead2pass.com 40 Cisco 350-029 Exam
A. Inserted between the MPLS label stack and the Layer 3 payload
B. Inserted between the MPLS label stack and the Layer 3 Header
C. Inserted between the MPLS label stack and the Layer 2 payload
D. Inserted between the MPLS label stack and the Layer 2 header
Correct Answer: C
QUESTION 139
What is the proper MP-BGP configuration between the shown PE routers to implement MPLS VPNs on PE-R2 ?
A. None of the above
B. router bgp 1 neighbor 50.0.0.4 remote-as 1 neighbor 50.0.0.4 update-source Loopback0 no auto-summary ! address-family ipv4 neighbor 50.0.0.4 activate neighbor 50.0.0.4 send-community extended exit-address-family
C. router bgp 1 neighbor 50.0.0.4 remote-as 1 neighbor 50.0.0.4 update-source Loopback0 no auto-summary ! address-family vpnv4 neighbor 50.0.0.4 activate neighbor 50.0.0.4 send-community extended exit-address-family
D. router bgp 1
neighbor 50.0.0.4 remote-as 1
neighbor 50.0.0.4 update-source Loopback0
no auto-summary
“First Test, First Pass” – www.lead2pass.com 41
Cisco 350-029 Exam
!
address-family vpnv4 unicast multicast
neighbor 50.0.0.4 activate
neighbor 50.0.0.4 send-community extended
exit-address-family
Correct Answer: C
QUESTION 140
What is the importance of using Virtual Output Queues on ingress Line Cards in a high-end router?
A. Prevents head-of-line blocking
B. Uses less memory
C. Increases forwarding performance
D. Simplifies configuration
Correct Answer: A
QUESTION 141
Which of the following statements about MD5 Routing Updates authentication is valid? (Select two)
A. The MD5 algorithm inputs the routing updates of arbitrary length and outputs a 128-bit hash
B. The MD5 algorithm inputs the routing updates of every 64bit length and outputs an 8-bit hash
C. Multiple keys are supported
D. Routing updates packets are delivered in encrypted messages
E. Shared secret keys are delivered in encrypted messages
Correct Answer: AC
QUESTION 142
In which of the following BGP-related events is an End-of-RIB (EOR) message sent?
A. Just before sending a CEASE message to tear down the session.
B. Following a link flap in the BGP speaker’s AS.
C. Following a Route Processor Switchover.
D. During initial convergence.
E. During capability negotiation.
Correct Answer: CD
QUESTION 143
What is the requirement of Remote Triggered Black Hole (RTBH ) filtering?
A. IBGP updates exchange between trigger router and black hole router
B. EBGP updates exchange between trigger router and black hole router
C. OSPF updates exchange between trigger router and black hole router
D. ISIS updates exchange between trigger router and black hole router “First Test, First Pass” -www.lead2pass.com 42 Cisco 350-029 Exam
E. None of above
Correct Answer: A QUESTION 144
RIPv2 differs from RIPv1 in that:
A. it uses multicast address 224.0.0.10,instead of broadcast.
B. it uses multicast address 224.0.0.9,instead of broadcast.
C. it can use either multicast or broadcast addresses,instead of just broadcast.
D. it sends incremental updates,instead of periodic updates.
E. it is classless,instead of classful
F. it supports authentication,and RIPv1 does not
Correct Answer: BEF
QUESTION 145
Which 4 statements regarding MPLS Label Stack Encoding is true?
A. A value of 4 represents the “Implicit NULL Label.”
B. A value of 0 represents the “IPv4 Explicit NULL Label.”
C. A value of 1 represents the “Router Alert Label”. The use of this label is analogous to the use of the “Router Alert Option” in IP packets (for example, ping with record route option).
D. A value of 2 represents the “IPv6 Explicit NULL Label”
E. A value of 1 represents the “IPv1 Explicit NULL Label”
F. A value of 3 represents the “Implicit NULL Label”
Correct Answer: BCDF
QUESTION 146
What ISIS TLVs are used to support MPLS-traffic Engineering?
A. Extended IS neighbor TLV # 22
B. Extended IS name TLV #137
C. Extended IS resource TLV #138
D. Extended IS reachability TLV #135
E. Router ID TLV # 134
Correct Answer: ADE
QUESTION 147
The layer 2 protocol used by POS technology offers a standarized way for mapping IP packets into
SONET/SDH payloads. Select the correct sequence of POS operation.
1) Data is scrambled and synchronous mapping takes place by octet into the SONET/SDH frame.
2) Encapsulated via Point-to-Point Protocol (PPP) takes place framing information is added with High-level
Data Link Control (HDLC).
3) Gaps between frames are filled with flags, set to value 7E.
4) Octet stuffing occurs if any flags or resultant escape characters (of value 7D) are found in the data.
“First Test, First Pass” – www.lead2pass.com 43
Cisco 350-029 Exam
5) Data is segmented into an IP datagram with its 20-byte IP header.
A. 1,2,3,4,5
B. 1,3,4,5,2
C. 2,3,5,4,1
D. 5,2,3,4,1
E. 5,2,3,1,4
Correct Answer: D QUESTION 148
Select 3 AVPs (Attribute-Value Pair) which MUST be present in the ICRQ:
A. Message Type
B. Calling Number
C. Assigned Session ID
D. Called Number
E. Call Serial Number
Correct Answer: ACE
QUESTION 149
Which two options best describe the purpose of session ID and cookie field in a L2TPv3 packet?
A. The session ID is a 32-bit locally significant field used to identify the call on the destination or egress tunnel endport. The session ID will be negotiated by the control connection or statically defined if using the L2TP v3 data plane only
B. The cookie is a variable length(with a maximum of eight bytes),word-aligned optional field. The control connection can negotiate this as an additional level of guarantee beyond the regular session ID lookup to make sure that a data message has been directed to the correct session or that any recently reused session ID will not be misdirected.
C. The cookie is a 32-bit locally significant field used to identify the call on the destination or egress tunnel endpoint. The cookie will be negotiated by the control connection or statically defined if using the L2TPv3 data plane only
D. The session ID is a variable length(with a maximum of eight bytes),word-aligned optional field. The control connection can negotiate this as an additional level of guarantee beyond the regular cookie lookup to make sure that a data message has been directed to the correct session or that any recently reused cookie will not be misdirected.
Correct Answer: AB
QUESTION 150
As described in rfc 3270,short-pipe mode operstion, the PE to CE egress polices are based upon:
A. topmost label exp value
B. customer marking
C. Innerrnost label exp value
D. Qos groups/discard class
E. remarked IP tos value
F. MDRR quantam “First Test, First Pass” – www.lead2pass.com 44 Cisco 350-029 Exam
Correct Answer: B
QUESTION 151
The Outer.1Q tag represents customer VLAN ID and inner.1Q tag represents Provider VLAN (PVLAN )
A. The Outer.1Q tag represents customer VLAN ID and inner.1Q tag represents Provider VLAN (PVLAN )
B. It is an effective way to achieve VLAN transparency between Provider and enterprise customer by tunneling one ser of VLAN tags inside a second VLAN tag
C. The Outer.1Q tag represents Service VLAN (PVLAN) and inner.1Q tag represents customer VLAN
D. QinQ is a way to hide native VLAN which can conflict with Provider native VLAN
Correct Answer: C
At Flydumps.com, we ensure that our Cisco 350-029 material is accurate, up to date, and will ensure you pass your certification exam on the first try. If you want to pass your IBM C2090-611 exam, Flydumps.com would be your best choice.
Cisco 350-029 Study Guide, Offer HP hp0-786 Latest Dumps On Our Store