Certadept IT Certification Prep, 100% Guaranteed Pass – Certadept.com

Exam A QUESTION 1
Match each 3Com Wireless Switch (WX) term with its description.
A.
B.
C.
D.

Correct Answer:
QUESTION 2
Which functionality is transferred from 3Com Access Points (APs) to the 3Com Wireless LAN Controller/ Switch, creating Fit APs or Managed Access Points (MAPs) with the 3Com Wireless LAN Mobility System?
A. Radio frequency (RF) radio, encryption and roaming
B. Encryption, roaming and security policy
C. Authentication, roaming and security policy
D. Encryption, authentication, roaming and security policy
E. Encryption, authentication and security policy
Correct Answer: C QUESTION 3

Wireless LAN (WLAN) IEEE 802.11a Turbo Mode bonds two channels together for up to 108 Mbps data rates.
A. False
B. True

Correct Answer: B QUESTION 4
Which three steps are required to configure a non-encrypted 3Com Wireless Distribution System? (Choose three.)
A. Ensure all access points (APs) are configured for Managed Access Point (MAP) mode
B. Copy the access points (APs) to the Wireless Distribution System (WDS) configuration
C. Configure the access points (APs) for bridge mode
D. Assign each access point (AP) the same IP address
E. Configure the access points (APs) for group mode
F. Assign each access point (AP) the same Service Set ID (SSID) and radio channels

Correct Answer: BCF QUESTION 5
Arrange the steps to connect to a Wireless Network in WindowsXP.

 » Read more about: 3Com.ActualTests 3M0-600 v.2006.08.17  »

Exam A
QUESTION 1
In V2.x code on a 3Com 5000 or 6000 series router, if the firewall is enabled, which packet is NOT inspected by default?
A. Non-fragments
B. First fragments
C. Non-first fragments
Correct Answer: C
QUESTION 2
In V2.x code on a 3Com 5000 or 6000 series router, which is NOT provided by Application Specific Packet Filtering (ASPF)?
A. Java Blocking
B. Site and content blocking
C. Enhanced session logging
D. Support for Port to Application Mapping (PAM)
E. Defense against Denial of Service (DoS) attacks
Correct Answer: B
QUESTION 3
In V2.x code on a 3Com 5000 or 6000 series router with firewall enabled, what happens when exact packet matching for fragments is enabled?
A. L3 information is recorded for all fragments
B. L3 information is recorded for first fragments
C. Non-L3 information is recorded for all fragments
D. Non-L3 information is recorded for first fragments
Correct Answer: D
QUESTION 4
Which term does not describe or refer to a frame relay function or parameter?

 » Read more about: 3COM 3M0-331 3Com WAN Specialist Final Exam v2.0 169 Q&A Version 2.29  »

Exam A
QUESTION 1
Which file system command displays the directory entries on a 3Com switch?
A. dir /all
B. cd dir /all
C. display dir
D. display dir /all
E. dir display /all
F. mkdir display /all

Correct Answer: A
QUESTION 2
What is the purpose of the RIP View command network network_address?
A. Enables RIP on all switches with this network address
B. Enables RIP on the switch that is configured with this IP address
C. Displays all RIP routes associated with this network address or with a subnet of this address
D. Enables RIP on all interfaces that are configured with this network address or with a subnet of this address

Correct Answer: D
QUESTION 3
Which two are Super-VLAN configuration requirements/limitations on the Switch 8800? (Choose two.)
A. Up to 64 ports can be assigned to a Super-VLAN
B. Up to 64 Sub-VLANs can be assigned to a Super-VLAN
C. ARP, VRRP and DHCP are not supported on Super-VLANs
D. Sub-VLANs terminate at a router and are isolated at Layer 3
E. Super-VLANs are assigned an IP address; Sub-VLANs may not be assigned an IP address

Correct Answer: BE
QUESTION 4
Which Switch 5500 model(s) does not support Distributed Resilient Routing (DRR)?

 » Read more about: 3Com_PrepKing 3M0-250_v2011-06-11_58q_By-Shreya  »

Exam A QUESTION 1
What is the most common Layer 2 method for handling multicast traffic?
A. DVMRP
B. PIM-SM/DM
C. IGMP Snooping

Correct Answer: C QUESTION 2
Which two features are supported on all Switch 8800 I/O modules? (Choose two.)
A. Small Form-factor Plug-in (SFP) interface for all Ethernet ports
B. IEEE 802.3ad Link Aggregation
C. Layer 2/ Layer 3 switch packet processing
D. Each interface module maintains its own routing and forwarding tables

Correct Answer: BC QUESTION 3
Which three features are only supported on the Switch 5500G-EI switch models? (Choose three.)
A. Hot-swappable Application Module Slot
B. PoE upgradeable power supply unit
C. Four GBIC Small Form-factor Plug-in (SFP) ports
D. 24 or 48 10/100/1000 Mbps ports
E. Port-based VLANs

Correct Answer: ABD QUESTION 4
Which component of XRN technology is defined as: “An advanced routing implementation that allows multiple interconnected switches in an XRN solution to behave as a single active routing entity”?

 » Read more about: 3Com_RealExamQuestions.Com 3M0-212_v2011-11-09_142q_By-Kathy  »

QUESTION 1
The Switch 7700 or Switch 8800 can be used as the primary authentication service or as a backup if the RADIUS server group is unavailable.
A. True
B. False

Correct Answer: A
QUESTION 2
Which four are Switching Fabric features/Functions on the Switch 8800? (Choose four)
A. Each Switch Fabric has a data channel to every module
B. Supports a hot-swappable, load-balancing Switch Fabric.
C. There is a data channel between the two Switch Fabrics.
D. Each Switch Fabric has a management channel to every module
E. Supports a hot-standby, hot-swappable redundant Switch Fabric
F. The master Switch Fabric is always set to slot #1 unless the fabric in slot #1 fails
G. The master Switch Fabric provides route calculation and management for the entire chassis

Correct Answer: ABCE
QUESTION 3
What is the maximum number of Linux Aggregation load-balancing groups supported on the Switch 7700?

 » Read more about: 3Com_RealExamQuestions.Com 3M0-211_v2011-11-09_90q_By-Katelinn  »