Cisco CCNP Wireless 2020 change
CCNP wireless -> CCNA Enterprise
New Cisco CCNP Wireless Exam List and Pass4itsure brain dumps
CCNP Enterprise Certification: https://learningnetwork.cisco.com/s/ccnp-enterprise
Where do I find a 300-365 PDF or any dump to download? Here you can easily get the latest Cisco CCNP Wireless 300-365 exam dumps and 300-365 pdf! We’ve compiled the latest Cisco 300-365 exam questions and answers to
help you save most of your time. Cisco 300-365 exam “Deploying Cisco Wireless Enterprise Networks (WIDEPLOY)” https://www.pass4itsure.com/300-365.html (Q&As:144). All exam dump! Guaranteed to pass for the first time!
Cisco CCNP Wireless 300-365 Exam pdf
[PDF] Free Cisco 300-365 pdf dumps download from Google Drive: https://drive.google.com/open?id=16Q-ehFMS9Ey0v1bga8JjOwTDSW4Zbrur
Related Cisco CCNP Wireless Exam pdf
Cisco exam certification information
300-365 WIDEPLOY – Cisco: https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/wideploy.html
Cisco CCNP Wireless 300-365 Online Exam Practice Questions
QUESTION 1
What is the best practice for setting the WLC v7.0 use of WLAN QoS settings to support SIP phones on a VoWLAN?
A. Configure SIP with static CAC only with SIP call snooping.
B. Configure SIP with static CAC only without SIP call snooping.
C. Configure SIP with load-based CAC only with SIP call snooping.
D. Configure SIP with load-based CAC only without SIP call snooping.
E. Configure SIP with load-based CAC and TSPEC only with SIP call snooping.
Correct Answer: A
QUESTION 2
A wireless engineer must optimize RF performance for multiple bindings with multiple types of construction and user
density. Which two actions must be taken? (Choose two.)
A. Enable DTPC on the network.
B. Configure RF Profiles for each area type.
C. Configure WMM profiles for each building.
D. Configure FlexConnect groups for each building.
E. Configure AP groups for each area type.
Correct Answer: BE
QUESTION 3
When CAPWAP protocol runs over IPv4, which UDP port numbers are used for control and data traffic, respectively?
A. control 5246, data ?UDP-Lite(IP Protocol 136)
B. control 5247, data ?5246
C. control 5246, data ?5247
D. control 5247, data ?UDP-Lite(IP Protocol 136)
Correct Answer: C
QUESTION 4
In a Cisco controller-based wireless network that supports workgroup bridges, what is the maximum amount of wired
client connections supported on a workgroup bridge?
A. 25
B. 20
C. 35
D. 30
Correct Answer: B
QUESTION 5
Which protocol/port number is used by mDNS for service advertisement?
A. TCP 5353
B. UDP 53
C. UDP 5353
D. TCP 53
Correct Answer: C
QUESTION 6
You have just added a new MSE to Prime Infrastructure and want to synchronize the MSE with your 5508 WLC. which
is located behind a firewall in a DMZ. You notice that NMSP messages are failing between the two devices. What traffic
needs to be allowed on the Firewall to ensure the MSE and WLC can communicate using NMSP?
A. UDP 16113
B. TCP 1613
C. TCP 16113
D. UDP 1613
Correct Answer: C
QUESTION 7
An engineer must create data-link redundancy for the company Cisco Wireless LAN Controller. The engineer has
decided to configure LAG-based redundancy instead of port-based redundancy. Which three features of LAG-based
redundancy helped steer this decision? (Choose three.)
A. All interface traffic passes as long as one port is up.
B. Multiple untagged dynamic interfaces on same port.
C. Interface connection to two separate non-stacked switches.
D. Packets are always sent out on the same port they are received on.
E. Full bandwidth of all links available.
F. Ports are grouped into multiple LAGs.
Correct Answer: ADF
QUESTION 8
How is password recovery performed on a Cisco Mobility Services Engine 3300 Series?
A. Interrupt the boot sequence and modify the GRUB boot loader.
B. Reboot using a CD that is imaged with an ISO bootable file to reimage Cisco MSE.
C. Interrupt the boot sequence and modify the BIOS boot loader.
D. Use the emergency TFTP bootable image.
Correct Answer: A
QUESTION 9
You have VoWiFi running on FlexConnect AP with centrally-switched SSID. Which configuration must be performed to
preserve marking for central-switching SSID?
A. Trust DSCP
B. This will not work. The WLAN should be locally switched and we need to trust CoS.
C. Trust CoS
D. No need to trust anything. It should work fine because the WLAN is centrally switched.
Correct Answer: A
QUESTION 10
A network administrator has had issues with clients giving out their username and password to other employees to
authenticate to the internal wireless SSID. Which 802.1x authentication stops users from being able to share
credentials?
A. EAP-TLS
B. EAP-MSCHAPv2
C. LEAP
D. EAP-FAST
Correct Answer: A
QUESTION 11
By default, how long does a Mobility Services Engine wait for an echo response from a Wireless LAN Controller before
declaring the neighbor dead?
A. 10 Seconds
B. 60 Seconds
C. 15 Seconds
D. 30 Seconds
Correct Answer: D
QUESTION 12
An engineer must deploy FlexConnect APs to a site that typically has 300 ms latency to the WLC. Which typical
operating mode must the engineer plan on for normal operations?
A. local authentication, local switching
B. central authentication, central switching
C. central authentication, local switching
D. connected mode
Correct Answer: A
QUESTION 13
Which three fields are required when creating a new NetFlow Exporter? (Choose three.)
A. IP address
B. AP group
C. WLAN ID
D. port number
E. SSID
F. exporter name
Correct Answer: ADF
Share Pass4itsure discount codes for free
The benefits of Pass4itsure!
Pass4itsure offers the latest exam practice questions and answers free of charge! Update all exam questions throughout the year, with a number of professional exam experts! To make sure it works! Maximum pass rate, best value for money! Helps you pass the exam easily on your first attempt.
» Read more about: Real and effective Cisco CCNP Wireless 300-365 exam dumps and 300-365 pdf online download »
